Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styrolution® PS ECO 168N BC100 - PS - INEOS Styrolution

Material Data Center offers the following functions for Styrolution® PS ECO 168N BC100:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styrolution PS datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Optical properties - Other properties - Test specimen production - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 1.5 cm³/10min ISO 1133
Temperature 200 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3300 MPa ISO 527
Yield stress 59 MPa ISO 527
Strain at break 3 % ISO 527
Flexural modulus, 23°C 2280 MPa ISO 178
Flexural strength 160 MPa ISO 178
Tensile creep modulus, 1h 3300 MPa ISO 899-1
Tensile creep modulus, 1000h 2600 MPa ISO 899-1
Ball indentation hardness 150 MPa ISO 2039-1
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 86[ann.] °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 98[ann.] °C ISO 75-1/-2
Vicat softening temperature, B 101 °C ISO 306
Coeff. of linear therm. expansion, parallel 80 E-6/K ISO 11359-1/-2
ASTM Data
Vicat Temperature 108 °C ASTM D 1525
Other Standards[S]
Thermal Conductivity, solid state 0.17 W/(m K) DIN 52612-1
S: These properties are reported by the producer according standards that are different to our defaults.  ann.: annealed
Electrical propertiesValueUnitTest Standard
ISO Data
Relative permittivity, 100Hz 2.5 - IEC 62631-2-1
Dissipation factor, 100Hz 0.9 E-4 IEC 62631-2-1
Dissipation factor, 1MHz 0.5 E-4 IEC 62631-2-1
Volume resistivity 1E16 Ohm*m IEC 62631-3-1
Surface resistivity 1E14 Ohm IEC 62631-3-2
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 2 % ASTM D 1003
Light Transmittance 89 % ASTM D 1003
Other Standards[S]
Index of Refraction 1.57 - ISO 489
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Density 1040 kg/m³ ISO 1183
Test specimen productionValueUnitTest Standard
ISO Data
Injection Molding, mold temperature 40 °C ISO 294
Injection Molding, injection velocity 200 mm/s ISO 294
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 180 - 280 °C -
Mold temperature 10 - 60 °C -
Processing Recommendation ExtrusionValueUnitTest Standard
Type of extrusion sheet - -
Melt temperature 250 °C -
Characteristics
Processing
Injection Molding, Sheet Extrusion
Delivery form
Pellets
Special Characteristics
Heat stabilized or stable to heat
Features
Blending Resin, Foamable
Certifications
Contains renewable resources, Food contact, ISCC Plus
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.